Bioenno 12ah Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A light protective case for a Bioenno 12ah battery. Specifically this fits model BLF-1212A.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A light protective case for a Bioenno 12ah battery. Specifically this fits model BLF-1212A.
I use the battery for ham radio remote activation's. I wanted something light weight that could provide some protection to the battery.
I printed mine out of Fusion Filaments HTPET+ Carbon Rod Black, but any material will work. Supports are not needed.
Some other settings I had were .02 layer height, 2 walls and 4 top and bottom layers. I used 15% gyroid infill.
A note on the lid file. I have 6 of these total in use. They are each made out of a different filament so I can identify the battery. Some of them snap on fit perfectly and some are a little loose. On the ones that are loose, I added a few drops of super glue at several points in the channel on the lid. The ones I printed out of ASA seem to fit the best but I'm sure your experience will vary.