1 / 4
Adxl345 Fly Adapter for LS Fanmod (Neptune 4 series)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds Adxl Mount to the LS Fanmod
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 847
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (33)Powiązane
Only compatible with USB Fly-Adxl345(and same bolt pattern Devices). Included are two types of mounts:
TypeA
- glues onto the Center Carrier
- incompatible with 4010 Center Carrier
- invisible when Housing/Front is installed
- 2x M3x6mm Bolts required
TypeB
- replaces LED Housing from original Set
- alwas visible from the Front even with Housing installed
- 2x M3x6mm Bolts required
*.3mf sliced with Orca 2.2.0
latest Version
v113 (compatibility update)
v110 (compatibility update)
config Fly-Adxl only
[mcu adxl]
serial: /dev/serial/by-id/YOUR_ADXL-ID
[adxl345]
cs_pin: adxl:gpio9
spi_software_sclk_pin: adxl:gpio10
spi_software_mosi_pin: adxl:gpio11
spi_software_miso_pin: adxl:gpio12
[resonance_tester]
accel_chip: adxl345
probe_points:
110,110,20
-----
Feel free to buymeacoffee.com/lamarc