Lipstick Ring Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This object is a ring holder that is designed to look like an open lipstick tube.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This object is a ring holder that is designed to look like an open lipstick tube. It consists of three parts, for ease of assembly and the ability to print each part in a different color. One of the lipstick inserts included in the package has a crescent moon inset in it. There is one with no marking, if you prefer that.
This object was designed for my wife, who wanted a ring holder for her vanity.
Assembly
All of the parts should have enough tolerance built in to allow for easy assembly. Print all three pieces, slide insert into housing then place onto dish. Glue could be used to permanently affix housing to dish, but leaving the insert free allows for a color swap later if desired!
Dimensional Details
The widest point at the base of the lipstick housing is 15mm. A US size 5 should fit over it. If you need a smaller size, simply scale it down accordingly.
Print instructions
Category: Containers Print Settings
Printer Brand: FlashForge
Printer: Creator Pro
Rafts: No
Supports: No
Resolution: 0.1 mm
Infill: Low (< 15%)
Notes:
Print all components at same scale. Tolerances should allow easy fit. You may desire to glue items together for a permanent fit, but they should hold together.