Handle/Grip for OTF Fidget Knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A protective grip that slides over your existing "OTF Fidget Knife - Only 3 Parts" by Uhltimate.
- Ocena
- 4,167 / 5
- Polubienia
- 150
- Pobrania
- 1412
- Wydruki
- 6
- Wyświetlenia
- 6942
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This handle/grip give allows the user to more comfortably use the Fidget Knife by allowing a larger area for the palm to hold and also by covering/protecting the spring mechanism so you can have a full uninterupted grip.
The model also features some raised patterns for better grip at the spine of the model. I would also reccomend adding fuzzy skin features onto the side panels for a more tactile and aesthetic look. This can be achieved by adding a modifier model that only overlaps the desired areas.
Installation:
Install by simply pushing the assembled fidget knife into the grip handle fully, the latches at the opening should click and secure the assembly into place. Press from below to remove.
If having trouble with a looser fit between parts, try adding stripes of tapes onto the back of the fidget knife between the post cutouts to increase resistance. Otherwise try glue for a more permanant bond.
Updates:
v2 - Added more latches and increased thickness of latches for better holding power for looser fitting knifes. Also added a recess inside the handle to prevent resistance on the spring posts.
v1 - Original model