Testhook Triangle for printing on (PETG-) sheets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Testhook Triangle for printing directly on plastic sheets like PETG. For testing the strength of bonding.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This model is part of my “Printing with PETG on PETG (sheets)” experiments.
To print this model, You'll need an sheet of PETG (or other, but the same material as Your Filament) to directly print on.
I designed this to test the strength of bonding between a printed part and the PETG sheet.
How to print this, and what this is all about, please check out my blog post: https://printys.net/2024/05/04/printing-with-petg-on-petg/
Printed with PETG (obviously), 0.2 layerhight, 3 perimeters, gyroid infill 30%.
Don't forget to remove the protective film on the top side, before printing.
I have hung 12,5 kilos on it for over three hours, without any visible deformation.