1 / 1
FRC Main Breaker Shroud 1/4-20 Captured Nut — zdjęcie 1

FRC Main Breaker Shroud 1/4-20 Captured Nut

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made minor modifications to the model to allow the captured nut version to be printed without supports.

Ocena
5 / 5
Polubienia
14
Pobrania
244
Wydruki
1
Wyświetlenia
527
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

Took the fantastic model by cadandcookies and made minor modifications:

  • Reduced tolerances on ¼-20 nut size.
  • Added sacrificial bridges to the captured nut holes to allow them to be printed without supports.

The part shown in the photo was printed in ABS at 0.2mm.

The sacrificial bridges are 0.2mm in size, so I would recommend staying at 0.2mm layer height.