1 / 4
No Wiggle X Tensioner for Ender 3 V2 (Upgrade/Replacement) — zdjęcie 1
1 / 4

No Wiggle X Tensioner for Ender 3 V2 (Upgrade/Replacement)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Very snug fit. Cutout is exactly contoured to the Z plate and should minimize wiggle. Tolerances are tight, use force.

Ocena
0 / 5
Polubienia
7
Pobrania
39
Wydruki
0
Wyświetlenia
293
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Reuses all of the original hardware except the M4 bolt embedded inside the original insert.

Only non-original part needed is a long M4 bolt. The pulley will hold it in place while you line up and tighten the insert to the nut outside.

You don't need to print the knob cover, it's purely aesthetic

Tagi