Bone-shaped d4 Die
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 4-sided die shaped like a bone! Perfect for your necromancy spells.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 67
- Wydruki
- 2
- Wyświetlenia
- 295
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I saw a game in the store called Bluffaneer and I was inspired to recreate the 4-sided dice from the game in a 3d-printable form. I was honestly surprised I couldn't find that somebody had modeled this already!
Photos include a standard 20mm d20 for scale. I modeled this in inches, so the native size is 50.8mm long. That's the largest (failed print) version in the side by side.
I actually recommend printing this at ~80% scale (40mm long). 50mm seemed too big, 30mm (~60%) seemed too small.
As for printing orientation:
- SLA: If you have an SLA printer this will probably be easy? I dunno, do whatever you want/whatever your slicer provides.
- FDM: I had trouble printing this standing upright, but that's probably what gives the best result! I ended up using tree support and big brims and lots of post-print sanding. Printing horizontally gives irregular surface finishes between the top and bottom, if you're too lazy to do a lot of sanding down like I am.
Enjoy! Post your makes, I would love to see somebody with a better printer show me how good these can look when printed well