8.5 inch Aluminum Clamp Light - Shop Lamp Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soft diffuser for your 8.5 inch Aluminum Clamp Light.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Lamp diffuser for the 8.5 inch Aluminum Clamp Light. I have a few of these clamp lights that I use for accent lights and for lighting my 3d printer. I wanted a softer light that didn't hurt my eyes if I looked at it. I made it thicker in the middle to not have a hotspot there.
One of my 4 clamp lights was a tiny bit smaller even though it was also an 8.5" clamp light so I uploaded two sizes. One that is 216.5mm that fits most of mine and one that is 215mm that fits the smaller one.
Diffuser should clip on easily and stay attached.
My Print Settings:
- .6mm nozzle
- 1st layer height .4mm - The rest at .2mm
- Printed in PETG