Tie Fighter Support for Google Home Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tie Fighter Support for Google Home Mini with a lot of cosmetic parts.
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 195
- Wydruki
- 3
- Wyświetlenia
- 1187
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
This model uses the side wings from CaiotE which can be found here. Everything else is custom.
The panels can be printed without supports flat on the bed. The wings will require some small supports (easily removable) and the front and back holders can be printed with no supports standing upright.
By using different filaments and beds, you can apply different designs and textures to the panels. Check the photos.
I printed everything in PLA+ with a P1S with default settings at 0.16mm.
Do note that depending on your printer, the small internal panels (black pieces) may be printed bigger than the wings, so you may need to reduce the scale to like 97-98% (or any other value that may work for you). For me they worked directly with a P1S and they are pressure fitted.