Putikeeg Straight Key Topper and Magnet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some ergonomic upgrades to the Putikeeg Straight Key for both comfort and magnetic feel.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed the topper to fit as flush as I could get it with the Putikeeg Straight key. I tried to emulate an old Navy Fireproof topper while still allowing it to fit in the box it comes in. The topper screws right in with the OEM screw that the red topper uses. It's tight.
The magnet holders are for 17.5x9.5x2 mm bar magnets. Feel free to adjust to fit your own. It's tight in there, so don't make them too thick. Full transparency, I designed the bottom magnet to be held in by electric tape. You could probably glue the magnet in the holder, but I was content with tape. The issue is getting both magnets into position without them flying out. If you can get the magnets in place, the magnetic repulsion should hold them in place. The top is held in purely by this force. These magnets were given to me ages ago, I don't know where they came from, only the size.
I printed everything in PETG.