Duplo to Fisher Price Little People Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As shown - a tight fitting adapter to allow Fisher Price Little People to be used with Duplo or Duplo Compatible…
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 370
- Wydruki
- 4
- Wyświetlenia
- 1937
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
As shown - a tight fitting adapter to allow Fisher Price Little People to be used with Duplo or Duplo Compatible blocks.
You can print without support as long as you printer does okay with bridging. There is enough height to allow for some stringing/sagging, however.
If you don't have good bed adhesion, I'd recommend printing with a 2 or 3mm brim to prevent lifting.
Printed on my Mk3s this prints as a very tight fit. If your printer is off a little bit you may need to scale accordingly (a few % either way).
Please post makes if you find this useful.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15%
Filament:
Overture PETG Green
Category: Construction Toys