Cascade Card Wallet Remix with Drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small remix of the Cascade V2 wallet to add a drawer and tighten up the tolerances
- Ocena
- 4,571 / 5
- Polubienia
- 72
- Pobrania
- 432
- Wydruki
- 7
- Wyświetlenia
- 2224
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the original version of this wallet and printed it out a few weeks ago but I found that I really only needed 5 cards and I needed a place to store my Tile tracker card so I added a drawer on the back.
Some other modifications is
- Making it print in multiple parts to allow for different colors on the sliding mechanism
- Tightening up the tolerances to hold the cards tighter and help the fan out mechanism
- Removing the texture on the slider since it tended not to print out that great and I have a textured bed surface, so I found that worked better and looked nicer
Version 1.1
- Thickened up some of the walls to make it easier for 0.6 printers to print and prevent an issue during printing where some wallets fell apart after printing
- Toughened up the spring to prevent snapping and provide a more satisfying click (should also help the slide out mechanism be a little more reliable)
Experimental
- Added a new hinge version, this has some really tight tolerance so crank down your layer height.
- You can also try printing it with the door side down which works better for the hinge but causes the other parts to sag without support