PARTISAN 6 H / BL PARTISAN 9 REPLICA STARTER KIT GBB GBBR AIRSOFT

----------------

the parts list and the documentation to get started can be found here the link to the new manuals can be found here

https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing

---------------

documents reading order 

Project explained 

How to use it 

How to make it 

Tester data 

then the parts list / files from the starter set

--------------------------------------

1-11-2025
bolt, disconnect, upper is updated so you can do reloads wile the bolt is resting against the disconnect.

The disconnect is also updated to be stronger
 

all the files have been moved to zip files!

--

3-10-2025
triton-6 mag catches added

______________________

2-10-2025
added a complete Partisan-6 Step file
that might help some for making future models
 

some HSTS-6FA data have been added to the project explained PDF
---------

10-08-2025
M5G lowers haven been updated to have 1 extra M3 , 25mm reinforcement bolt

-------------

28-06-2025

CM-1 trigger is updated to work with the  3d printed fire selector

__

25-05-2025
CM-1 fgc6 FCG option added and documentation is updated for this

---

  27-01-2025
rogue-6 mag bar version added
3DN6 HUU, bolt and nozzle added

------

26-01-2025
manuals updated
with 3DN6 testing data and notes

--- 

22-12-2024
KWA / KSC bolt option added
trigger installment  helper pin added
 

-

20-12-2024
the info on the tungsten SF bolt weights have been added to the how to build manual.
 

--

19-12-2024
tester data, how to use, how to build PDF's are updated for KWA /KSC bolt data
 

- 

24-11-2024
Rogue mag catch bar added version

---

11-10-2024
M5 nut lower have been added. for a stronger connection

it will use a 30mm long M5 bolt with 3d printed grips
-------

25-09-2024
updated the green gas 2 way inlet valve section in the how to use pdf

_____

18-09-2024
co2 testing data added starts at page 38
and other manuals got some updates about CO2 and green gas

_____

14-09-2024
TM G18c bolts have been added and manual update

___

13-09-2024
bolt fronts have been updated with 2 options S (short) and N (normal) this will determent how far the nozzle can slide in the bolt. 

___


07-09-2024

APS XTP ACP bolts fronts have been added

small update on the M1D fire pin and left frame to act as a mag stop. and prevent gas from escaping when the mag is over inserted

__________
 

24-08-2024

mKII styled P6 charging handle
have been added  I found the 3d printed ones to weak
and the how to make manual have been updated.

----

4-08-2024
2 part upper 4mm OD 10mm magnet have been added.
PDF is updated
 

---

16-06-2014
new bolt fronts added it's highly recommended to update to this bolt front. So the nozzle cant fly out the front of the bolt in case of some tolerance issues. This update does not apply to AAP01 nozzles.

But this would bend the nozzle spring and gives ware on the nozzle that is unwanted.

https://youtu.be/3N8hDKkQq5k

______________________

17-05-2024

UNW redesigned Partisan 6 logo lowers have been added

_____________________

12-05-2024
a set of uppers have been added that can be used on P6 lowers and FGC-6 (except the stingray version) with the draw back that is less strong? but that should be fine for airsoft use

_________

8-05-2024
UDC (No Dust Cover)  upper from the release movie have been added
 

________________________________

3D MODEL DESCRIPTION

partisan 6 H / BL Partisan 9 replica starter kit GBB GBBR airsoft

the parts list can be found here
https://drive.google.com/drive/folders/1ppDKxs2tu0rj9MaRVWfpiozERtG7PVGz?usp=sharing

how it works as a H build
https://youtu.be/EOxz_rSy0eg

How it works as a BL build
https://youtu.be/q1lehob6zvo

suppressors outer barrels will be added later as a separate file set

This is the Partisan 6 (9) model. This in in concept the same as the FGC-6 lineup. But the bolt is shaped differently. There for tester data from the FGC-6 H , BL , SF can be considered the same for this model.

There is some parts cross compatibility but for more details on this read the: the FGC-6 models explained.PDF

use the FGC-6 partisan 6 Collection to find compatible mod parts
https://cults3d.com/en/design-collections/UntangleART/fgc-6-partisan-6-parts
https://www.printables.com/@UntangleWORKS/collections/1318026

3D PRINTING SETTINGS

print settings:
0.2 layer height should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

for the lower I would use a brim on both the outside and inside the part just to prevent it from warping