Camp-Chair Yeti Rambler Holder with router template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom mug-holder for directors-style Chairs. Includes router-template to trim the top.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 599
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Our Coleman camp-chairs came with cup inserts that were too-small for almost all of our cups and mugs so I designed this as a replacement. This is the third revision after I kept getting bigger mugs for camping.
Obviously this would work for any thin wood top table - or thicker, if you cut the opening to match.
This now fits the Yeti Ramblers we use.
I designed a router template that you can tape to the table which makes enlarging the existing hole very yeas with a small trim router and flush-cutting bit. Print the router template at 102 - 104% scale to give just a bit of wiggle room for the holder. On my Prusa 102% was a perfect fit.
You should print this with supports for the overhang so it sits flat when inserted into the table.
Please post any makes if you use this design!
Notes:
Print with supports for the top ring to print as flat and clean as possible.
I printed at .3 layer height with a .4 nozzle.