Heat Blanket Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement switch for a heated-pad - may be similar to heat-blanket switches. 3D printing makes this a much…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a replacement switch for a heated-pad - may be similar to heat-blanket switches.
3D printing makes this a much better part than the original injection molded piece - which, as you can see in the pics - had very little plastic left-over for twisting the switch on and off.
Print upside-down (slots facing up) with .2mm layer height and supports. The supports should pop-off leaving a relatively clean finish.
This is a very snug fit - but holds better than the original part and looks better in red!
Hopefully the design helps someone else fix what would be another throw-away item because of a small plastic part.
Print Settings
Printer:
FLSUN i3 2017 Version
Supports:
Yes
.2
Infill:
25%
Filament:
Amazon Basics PLA Red
Category: Replacement Parts