Hex Screwdriver Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Offset Hex-Head Screw Driver holder. I bought a good-set of ball-end hex screwdrivers and they are so-much better than…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 788
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Offset Hex-Head Screw Driver holder.
I bought a good-set of ball-end hex screwdrivers and they are so-much better than the right-angle hex-keys for most 3D printer operations (where you don't need a lot of torque).
I wanted something to keep the handles at the same height so I made this offset holder. It works perfectly for the Bondhus screwdrivers and may work for others. The holes are a very close fit and may need to be reamed-out slightly.
Print Settings
Printer:
FLSUN i3 2017 Version
Resolution:
.2
25%
Filament: Amazon Basics PLA Red
Notes:
Infil is personal preference. I use 3 top and bottom layers with this style and a thick (6mm) backing plate so it stays flat and gives me a sturdy surface to mount-to. Could likely be printed anywhere up to .3mm resolution without issue. I use .2 so I can keep a cleaner finish.
Category: Tool Holders & Boxes