1 / 22
ownMade - FilmoPlast R Paper Meding TapeHolder - Update CapV2 — zdjęcie 1
1 / 22

ownMade - FilmoPlast R Paper Meding TapeHolder - Update CapV2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

FilmoPlast ® R Paper Meding TapeHolder

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

@work we use this tape for repair archive paper, because there is only 2cm width or bigger to order i made this holder with a blade in it to cut it a middle in two or in three.

I use a tree support,  with 1 layer minus of the top for a beter release.

Update

At request I added 2 more guides at the front, on a new base plate into which the tape holder fits. So that I don't have to reprint the entire tape holder.

Holder

  • 190 x 35 x (5 bottom) mm
  • 90.14 mm high

Holder Bottom Update

  • PaperMedingTapeHolderBottom
  • 202.5 x 80 x 5

Cap

  • 51.5 x 11.25 mm inside
  • 55.5 x 20 x 15.25 mm

Cap Update

  • PaperMedingTapeHolderCapV2

Holder Multi

  • 195 x 90 x (5 bottom) mm
  • 95.03 high

Cap Multi

  • 51.5 x 23.25 mm inside
  • 55.5 x 20 x 27.25

Cap Multi Update

  • 51.5 x 23.25 mm inside
  • You can now lead the tape inside and outside the cap, then set the cap on the holder

Tape

  • Ø 40 mm gap inside
  • Ø 75 mm outside
  • 20 mm width

Blade

  • 43.4 x 18.45 x 0.2 mm

Tagi