"Milspec" Bug-A-Salt Stock Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A non-invasive, removable, and tight fitting stock adapter for the Bug A Salt 3.0
- Ocena
- 4 / 5
- Polubienia
- 74
- Pobrania
- 537
- Wydruki
- 3
- Wyświetlenia
- 3783
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
“Milspec” Bug A Salt 3.0 Stock Adapter
In the pursuit of owning the ultimate tactical bug exterminator, I was in search of a robust, tight-fitting stock adapter for the Bug A Salt 3.0 that didn't require tapping screws into the body or damaging anything.
Having not found one that quite met my needs, I decided to make my own.
…Enter the “Milspec” Bug A Salt Stock Adapter!
Hardware needed:
• M3 screws/nuts
○ 4x 25mm M3 screws
○ 4x M3 nuts
○ See photos of my measurements
Printing:
• Print the main body with the back square cutout facing up.
○ This is a bit of a difficult print to orient, so supports are REQUIRED.
○ I originally printed this with the orientation matching how it would be placed on the Bug A Salt (top side is facing the top of the printer) and my buffer tube adapter cracked due to the torsion/pressure along there. Therefore, layers need to be perpendicular to the stress of the buffer tube.
• I've provided sample .gcode files as well as the models.
○ These show orientation of how I printed these parts.
○ I printed in PETG, so your mileage may vary on how robust PLA or other materials are.
○ I printed in .3 layer line height to help with general part strength
Assembly:
• Place the M3 nuts in the 4 slots on the Bottom Mount.
• Hook the Bottom Mount through the hole where the trigger is - it should be able to fit with a 90 degree turn pretty easily.
• Place the Body Mount and Top Mount on, and screw down both sides evenly.
Screw until reasonably tight, but don't overtighten - this model was made to have a good amount of pressure from all sides, so you might have to squeeze the bottom and top mounts while screwing in the M3 screws.
----------
*General safety Disclaimer*
Any parts of this project are for the Bug-A-Salt 3.0, while not a toy, is not a firearm. This is intended to add functionality to a product that fires table salt to kill insects. Please print this responsibly and understand the implications of modifying this tool which may more closely appear as a functional firearm. I'll only be using this indoors, so if using “in public” you might want to print this in more obvious colors, etc.
----------