Radio call sign tag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A name tag for your radio call sign
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 223
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This should be an easy print in the material of your choice. The model I have included has no call sign. You may add your own, or contact me for a model with yours. Align the back section of the model with your build plate. Depending on your material, supports may be needed for the magnet holes (or in the case of a resin print). Note that leftover support material in the magnet holes makes a tighter fit for the magnets and may be beneficial if you want a friction fit. This design is intended to be painted. You will want 4 8mm(diameter)x2.5mm neodymium magnets to hold the two pieces together. On my prints, some of the magnets pressure fit well enough to hold and others required a little CA glue. Watch your polarity! You may add your own, or contact me for a model with yours. You can use a piece of ferrous metal instead of the back plate and magnets, however you must make sure the magnets in your tag are opposite polarity so that they both attract the metal. If you choose a metal plate, you will also want to make sure the edges are clean to avoid damage to fabric or flesh.
Happy printing!