Drum filament 1,75mm sample - Revolver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Due to the large space occupied by the rolls of filament and that every time I wanted to see a color sample had to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Due to the large space occupied by the rolls of filament and that every time I wanted to see a color sample had to open a lot of boxes, I thought about making a small sample of filaments, to see the color of each.
What came out is this, a bit complicated to print (because if the printer is not properly calibrated the filament does not fit well into the slots or comes out).
I suggest printing a small section of the revolver to check the correct passage of the filament.
The assembly is simple, I include the cover with a small hole to introduce the filament and the piece that holds it inside and allows it to turn to select another box. Simply paste the teeth of the cover with the teeth of the support taking special care that the glue does not go to the wall of the revolver, it is not necessary a large amount of glue, I use cyanoacrylate.
The use is also simple simply introduce filament in one of the boxes and when there are about 8 mm to reach the end cut and push with some fine tool.
As always I include the file in FreeCad for its modification.
Print Settings
Printer Brand:
Deltaprintr
Printer:
Deltaprintr Kit
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
15%
Category: 3D Printer Accessories