1 / 1
Rear Antenna Mount for Armattan Chameleon TI Quadcopter with HDZero VTX and TBS Tango RX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Armattan Chameleon Quadcopter predates the HDZero VTX, so I needed a way to mount the antenna.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This antenna mount allows for mounting both the video transmitter and flight receiver antennas on the back of an Armattan Chameleon TI quadcopter.
To mount the VTX antenna, first route it from the pointy end back to the middle. Then connect it to the VTX.
Use the ready-straw red straws that come with spray can products for the TBS Tango Nano RX antenna wires.
I made the first one out of PLA but later made one out of TPU which is much better.