120mm Fan Air Purifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted an air purifier with my 120mm fan, and i found this model and decided to remake and adjust for a 120mm fan !
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 335
- Wydruki
- 1
- Wyświetlenia
- 2918
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For more Models check my profile https://cults3d.com/en/users/CelestiaChibiPC/3d-models
UPDATE 08/05/2024
Made a new black and white version with the proper PLA and its pretty good. Taller than the first version made with leftovers. In the future i will add some activated charcoal in the middle.
UPDATE 07/05/2024
Decided to paint it in black and its prettier.
__________________________________________
I wanted an air purifier with my 120mm fan, and i found this model and decided to remake and adjust for a 120mm fan ! I used some PLA leftovers that were at their finals thats why the different colors. For filter i bought a car air conditioner filter (just like HEPA) and cut to fit it. Here in Brazil we can find filter for car air conditioners really cheap from BOSCH.
Dont mind about the seam/gap into mine, that happened because the filament ended in the middle of the print so i decided to glue the top to the rest of the body. I printed the top by itself/alone from the rest of the body.
Pay atention with the air flow side/arrow of the filter. I advise you to buy a big car air conditioner filter so you can cut the size that you need to properly fit.