Lamp #24 - CityScape
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A free-form cubic frame lamp. Old factory style, abstract Cityscape.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
A free-form cubic frame lamp. Old factory style, abstract Cityscape.
185 mm height x 150 mm Width
Print 2 of each of the walls and 1 of each of the base and the lid.
Melt 1 x M3 Inserts into the bottom and top bar of each wall.
Attach the walls to each other. The connections are tight, so work them into each other gradually to loosen them a bit.
Run the cable through the base, attach the cable and switch wire to the socket and turn the socket into the base plate. Then attach the base plate using 2 to 4 M3 x 8mm screws
Slide the lamp shade cover into the 4-wall frame and attach the lid wit the M3 by 10 mm screws
Use supports for the 2 shorter wall pieces. from baseplate only, to support the wall connector pieces.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.amazon.de/dp/B0B5MPL9MX
8 M3 by 14 screws
https://de.aliexpress.com/item/32443118299.html?
8 x M3 Inserts
https://www.amazon.de/dp/B08BCRZZS3?
The slicer settings for the shade base and shade holder, cage frame and top
.20 mm Standard
(All standard settings and speeds, Aligned seam settings)
Filament: eSun PLA+ Black
The slicer settings for The Shade:
Supports required. I used auto-tree from build plate only on a P1P.
Filament: Sunlu PLA+ White
.20 mm Standard Quality and Generic PLA
Infill % - 30 , Gyroid
Wall Loops - 6
Seam Position- Aligned