Bookshelf endstop bracket for Sovella wall mount shelves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Endstop that slots into the metal shelf to stop things falling over
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Endstop that slots into the metal shelf to stop things falling over. This is specifically for Sovella 20cm shelf.
This can also be used as a fixing point for decorative or functional additions.
Printed from PLA on Ender 3 S1. This requires supports and I've found that custom manual bridge supports are (usually) best. An example is provided in attached 3mf file. Those came off easily with cutters.
In the end I found it's best to print this with the flat surface facing down and requiring support - the curved side is just too steep of an overhang and I've yet to master incremental overhang printing (as in arc overhangs).
Flip the model over to print the other end of the shelf.