Nicotine/Snus can dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pipe that can be used to store and dispense nicotine pouch cans.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 1567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed from UndeadSold1er22's Desktop Zyn Can Dispenser.
The models should be printed in the position in which they open in the slicer (dispenser upright and lid upside down).
If your printer tends to leave a noticeable mark at the seam (a clearly thicker vertical line than other parts), I recommend scaling the model to 104% so that the cans fall freely when you take the bottom one.
You have to use supports when printing the dispenser. Printing the lid does not require supports (remember to scale lid also if you scale the dispenser).
There are 7 different options for the dispenser, the smallest version holds 4 cans and the largest 10. The dispenser is sized according to VELO cans (diameter 70 mm and height 25 mm).
The outer dimensions of the dispenser are a diameter of 75 mm and a height of 102 mm up to 252 mm (the height and capacity are stated in the name of the models' stl files). The outer dimensions of the lid are a diameter of 79.2 mm and a height of 20 mm.