Light Switch Blocker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is meant to prevent a light switch being toggled from its current position.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v2.0
You can print this in any material, and really any settings. Does not require supports if you print it with the “front” face down - the overhang for the screw inset is very small and should bridge fine; any imperfections in the surface will be covered by the screw head.
I use this to keep myself from flipping a switch where I have smart bulbs installed, but it would be useful for other situations like outlets that are linked to a switch that you need to have stay on (think National Lampoons Christmas Vacation). There are better solutions, like a smart switch or removing the switch and directly tying the source power together, but this costs $0.02 and takes a couple seconds to install, while also not preventing the use of the switch if needed (just pivot it to the side).