Sodastream holder for Cornelius kegs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A support bracket fitting a Cornelius keg (with the protective rubber handle) holding a Sodastream bottle.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 501
- Wydruki
- 1
- Wyświetlenia
- 3952
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Do you use a Sodastream tube to carbonize/pressurize your precious brews in Cornelius kegs?
Have you (like me) found it a bit cumbersome moving a keg around with its Sodastream tube attached? Or just finding somewhere to put the Sodastream tube so it does not fall over and damage the pressure regulator?
Look no further! :)
As I shared your woes, inspiration struck! Why can't the tube be attached to the keg I thought? Have a 3D-printer I realized!
Please share my nowadays woe-free bliss with this marvellous bracket that keeps the Sodastream tube conveniently attached to the Cornelius keg!
Details;
- It fits regulators that have a circular fitting with a significantly larger diameter than the Sodastream bottle neck, with a maximum of 40mm outer diameter.
- To attach to the keg; first insert the Sodastream tube, then flip the bracket almost upside-down to fit it through the Cornelius keg handle cutout. Flip it back into its correct position and guide the Sodastream tube's neck into the smaller slot as you hang the bracket on the keg's rubber handle.
- The picture shows the bracket attached to an 18L Cornelius keg.
- Experience the bliss of tube-keg attachment!
Use at your own risk, no warranties or even suitability for its stated purpose given.
The v3 should fit Cornelius kegs with “beefier” handles as well!