Solar Panel Mount with a box for a battery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solar panel mount designed to provide off-grid power for micro-controllers.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Provide off-grid power for your IOT devices.
The concept is to charge a commonly available portable phone charger which provides 5v USB power to your microcontroller.
The mounting angle is adjustable for optimal sun angle.
Note: Not all portable chargers can provide power out while receiving power in. Ensure that your portable charger battery can power your device while being charged by the solar panels.
This is part of my DIY weather station
Print Instructions
Print with UV resistant materials.
I printed with a 20% fill. Greater fills may be needed in high wind environments.
Supports needed for the battery box.
Hardware
- 2 x M6 15mm panhead bolt
- 2 x M6 40mm panhead bolt
- 1 x M5 40mm pan head bolt
- 4 x M6 nuts
- 1 x M5 wingnut
- 6W 5V solar panel (the one I used: https://www.amazon.com/dp/B0C4L1L1BD )
- Portable charger/battery