Cable Passthrough Grommet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are a couple of grommets I made for my printer enclosure. I wanted a good way to feed the power cable and PTFE…
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 648
- Wydruki
- 8
- Wyświetlenia
- 4124
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
These are a couple of grommets I made for my printer enclosure. I wanted a good way to feed the power cable and PTFE tube into the enclosure without having a hole that lets a lot of heat out.
I printed mine in ninjaflex TPU (85A) but I'd imagine anything 95A and below will work.
You should be able to scale the X and Y dimensions as much as you'd like, although the gap between triangles will widen. I do not recommend scaling down, as the gap is currently 0.2mm and already requires a little post processing to pull the tabs apart.
I attached the fusion 360 files in case you want to edit it. I also added a non-filled version for use as a template to mark where you might need to cut.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.1mm
Infill:
25
Filament:
Ninjaflex TPU Black
Category: Parts