1 / 5
MG Midget 1500 - Front Turn Signal Cutout Fillers For 2" Beehive Lights — zdjęcie 1
1 / 5

MG Midget 1500 - Front Turn Signal Cutout Fillers For 2" Beehive Lights

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MG Midget 1500 - Front Turn Signal Cutout Fillers that use 2" Beehive style lights.

Ocena
0 / 5
Polubienia
3
Pobrania
63
Wydruki
0
Wyświetlenia
418
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

These just snap into the turn signal cutouts in the front bumpers of 1500 Midgets. They use a 2" round beehive style light. There are two versions: The one shown clamps the light into a bracket using a backer plate & (2) #6x1/4"(M3x8mm) flat head sheet metal screws. The other version utilizes the rubber grommet that comes with the lights to hold them in place.

 

For the lights, I just bought a (2) pack of NBWDY branded lights off the Jungle site for $15. To convert them to a 3 wire setup, I just use some 1N4004 diodes and a 150Ohm ¼ Watt resistor. I followed the wiring diagram that is included in the pictures.

 

Print these in either ABS or ASA. 

Tagi