Lover - Taylor Swift
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this for my girlfriend to add a little decoration to her calendar. It is the title of the album, which the…
- Ocena
- 4,6 / 5
- Polubienia
- 46
- Pobrania
- 663
- Wydruki
- 5
- Wyświetlenia
- 4421
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
Made this for my girlfriend to add a little decoration to her calendar.
It is the title of the album, which the photoshoot for the calendar was done for, in a similar font as the original.
The beginning swoop of the L is a little thin for a 0.4mm nozzle, so if you have a smaller nozzle size it would probably come out better. You can also adjust the size of the model to your liking, it shouldn't cause too many problems other than the beginning and end swoop of the L and R respectively potentially being too thin to print (in which case your slicer will likely just cut off the sections that are too small).
The model in the pictures is an earlier version than the model uploaded, which is why the hook is on the v instead of the o.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.2mm
Infill:
10
Filament:
Overture PETG Pink
Notes:
Smaller nozzle size is recommended.
I used 4 perimeters to make this solid.
Category: 2D Art