1 / 3
Haruhi Suzumiya Danchou Desk Pyramid — zdjęcie 1
1 / 3

Haruhi Suzumiya Danchou Desk Pyramid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a model of the "Danchou" (Leader) pyramid on Haruhi Suzumiya's desk. Made it for a friend who had requested…

Ocena
0 / 5
Polubienia
0
Pobrania
36
Wydruki
0
Wyświetlenia
485
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a model of the "Danchou" (Leader) pyramid on Haruhi Suzumiya's desk.

Made it for a friend who had requested it. When I did my initial search for Haruhi Suzumiya related 3D models I noticed a severe lack thereof, so here is my contribution for any interested parties.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.15 - 0.3

Infill:

10% / 2.5%


Filament:
SUNLU PETG Black

Notes:

The resolution is up to you, I went with 0.15mm because I was not planning on doing any post processing other than painting the words white. You can go with a larger resolution to save time, although I would recommend sanding and painting the print it if you do that.

I used 10% infill for the first 5mm of the base and added some BB's into the squares to weigh the print down. Then did a couple layers of solid infill to trap them in. The rest of the print I used 2.5% infill to help with any support, although it isn't really needed.

Lastly, I used PETG because I made the first couple layers with TPU to give the pyramid a softer bottom layer, so as to not scratch any finished wood.

𝗜 𝗿𝗲𝗰𝗼𝗺𝗺𝗲𝗻𝗱 𝗣𝗟𝗔 𝗳𝗼𝗿 𝗮 𝗱𝗲𝗰𝗼𝗿𝗮𝘁𝗶𝘃𝗲 𝗽𝗿𝗶𝗻𝘁 𝘀𝘂𝗰𝗵 𝗮𝘀 𝘁𝗵𝗶𝘀, 𝘂𝗻𝗹𝗲𝘀𝘀, 𝗹𝗶𝗸𝗲 𝗺𝘆𝘀𝗲𝗹𝗳, 𝘆𝗼𝘂 𝗵𝗮𝘃𝗲 𝗮 𝘀𝗽𝗲𝗰𝗶𝗳𝗶𝗰 𝗽𝗹𝗮𝗻 𝗳𝗼𝗿 𝗻𝗼𝘁 𝘂𝘀𝗶𝗻𝗴 𝗶𝘁.

Category: Decor

Tagi