M870 FRONT PICATINNY RAIL - AIRSOFT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airsoft front picatinny rail for M870 style shotguns
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to Uncle___Ben for his original design
It's a great start but unfortunately it was a bit small and stuck out on the front way too much for my liking so I went into tinkercad and remixed a flipped around, longer and less obtrusive design you see attached there.
I printed with 50% infill (probably overkill) and rotated it 90 degrees so the picatinny rail is facing upwards. I used supports but it depends on how good your printer is at overhang
I've added two designs with 45° offset rails (in both left and right configuration) with a small sight post at the front