Xiaomi Yi Camera Mount for Bear Bows
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This camera holder allows a Xiaomi Yi camera to be attached to the quiver anchor point on a Bear bow.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This camera holder allows a Xiaomi Yi camera to be attached to the quiver anchor point on a Bear bow. I took my measurements from the Bear "5 spot quiver". This quiver ships standard on the Bear Cruzer RTH, and quite likely several other Bear models. I don't know which ones so please don't ask!
To use, attach the holder as you would the quiver. Move the quiver latch into the locked position. Slide the Xiaomi Yi into the holder facing either forwards or backwards. Done!
Print Settings
Printer:
Custom FDM
Rafts:
No
Supports:
Yes
Resolution:
.20mm Layer Height
Infill:
20%
Notes:
Recommended to rotate the model so the flat bottom surface is on the bed. Might need to mirror it if you shoot left handed.
PETG is the best thing ever. Use it.
Post-Printing
You may need to clean up the mounting posts with a file if your printer makes a mess of support material.