Parametric VESA Offsets (15-85mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple offsets for 100mm VESA mounts.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 197
- Wydruki
- 1
- Wyświetlenia
- 492
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric VESA Offset By Qwerm
A simple offset 100mm VESA mount. Included is a SolidWorks file that can easily be modified to create custom offsets. I have also included various sizes in 5mm increments from 15 to 85mm offsets. It is designed for use with M4 hardware and requires 4x M4 Nuts. Inspired by MandicReally over on Thangs.com. There's a lot of VESA offset mounts out there but I needed on for a 48mm offset.
Settings used:
Material: PLA+
Extruder Temp: 190c
Bed Temp: 60c
Layer Height: 0.24mm
Wall Line Count: 3
Infill Percentage: 30%
Support: Optional
To modify the SLDPRT, simply edit the global variable named “OffsetAmount”.
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/