Barrel Muzzle Collet for the TC, TCU, CB, and CBU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of muzzles for various blasters. They all use a collet and collet screw, like an Indra. NOTE: The U…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 464
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of muzzles for various blasters. They all use a collet and collet screw, like an Indra.
NOTE: The U variant muzzles should be used with the SHORT VERSION of the muzzle nut. The threaded rod variants can use the short one or the long one, with no trench part or a trench part respectively.
To use this collet, you need one 016 o-ring, like the Indra. They are 5/8" ID, 3/4" OD, 1/16" Width.
The thread for this collet is derived from CaptainSlug's collet on the Indra.
If you can't find those exact o-rings, you can probably find some that are "close enough" at a local hardware store. 012 o-rings (the ones that go on the tip of ramrod pushers) can be used in a pinch (if you can get them around the barrel), but they cause the collet to have a very loose fit on the barrel.
Quick overview video: https://www.youtube.com/watch?v=_ravdZP-ueY
If you wish to print and sell this item, please contact me for licensing. I can be reached on Discord (Sillybutts#5905), Reddit (u/SillyTheGamer), or by Thingiverse comments.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
40
Filament: FusionFilaments PLA
Notes:
4 walls, gyroid infill.
Category: Mechanical Toys