Hole punch jig for A5 Kokuyo/Muji loose leaf ring binder notebook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple hole punch jig for punching holes in A5 sized paper for using with Kokuyo/Muji loose leaf ring binder notebook.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 184
- Wydruki
- 0
- Wyświetlenia
- 1595
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I want to add my own custom notebook/journal page into A5 ring binder notebook but can't find the easy way to do it. I have Muji and Kokuyo binders so I design the jig that will work for both. This jig should be working with a 6mm single hole puncher as shown in attached pictures.
Each hole is 6mm diameter and space between each hole's center is 9.5mm.
Print in 0.2mm layer height without support. Both PLA and PETG should work fine. After printing use a sharp thin knife and carefully (be very careful to not hurt yourself) separates all 3 tabs so a paper can be slide into the jig.