1 / 3
Chair from skilift based on a doppelmayr 2 seater
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chair from skilift based on a doppelmayr 2 seater (on request from someone)
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 253
- Wydruki
- 0
- Wyświetlenia
- 886
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Standard Digital File License
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
Chair from skilift based on a doppelmayr 2 seater (on request from someone)
This is a nice decorative piece if you are a skilift lover, if you have a working model skilift then you should be able to fit it on there by putting 2 grub screws (M2 x 5mm) in the the 2 holes prepared for it, if you want you can put an aditional (M2 x 3mm) grub screw to stop the chair from moving over the cable.
Print settings:

Part orientation:
