Window Planter Banister Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts to attach window style planters to balcony handrail
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Two-piece hanger mount for window style (thin-rectangular) planters. Initially the planters were just sitting on the balcony floor but wanted more room and also allow the plants to get more sunlight. These are designed to fit the banister / handrail and use M4 hardware to bolt around it allowing for a stable mount that resists rotation. Overall these and another set of 3 have been in this location for over 4 years and have had 0 issues. I've even let the planters in place while digging around in them and they have weathered several intense storms again without issue.
These were printed in PETG and I used a 0.6mm nozzle and large layer thicknesses both to speed up the print but also increase the strength. I recommend using whatever the thickest layers you can get away with and at least 2-3mm of perimeters to ensure it can handle the load. You could always use more than 3 per planter as well if you are unsure of the strength.
If you love my work and want to me to know:
Ko-fi.com/purevulcan