1 / 1
Toyota Hilux Surf wheel carrier stopper spacer — zdjęcie 1

Toyota Hilux Surf wheel carrier stopper spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Touota Hilux Surf (3rd Gen 1996-2002) tailgate mounted wheel carrier stopper spacer

Ocena
0 / 5
Polubienia
3
Pobrania
26
Wydruki
0
Wyświetlenia
352
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If your door stopper is old it can loose its shape and compress/wear over time and this contributes to a rattly wheel carrier. The hinge pins on the carrier do wear out over time are are not replaceable (at least not officially/easily) and whilst this (3mm) spacer cannot really compensate for wear in the pins, it can help reduce the rattling caused by the wear.

Be aware you may have to close the carrier a little harder with this fitted, but if it causes you to have to slam it excessivly then I would not advise using it, as your existing buffer is probably fine.

 

I printed in TPU, but I'm sure PETG would do the job just as well.

Tagi