Vacuum cleaner dust extractor for drilling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for vacuum cleaner to extract dust while drilling (concrete, brick, etc.) 20 degree angle
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 167
- Wydruki
- 1
- Wyświetlenia
- 669
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Outer diameter for the vacuum hose is 38,5 mm
Inner diameter is 34,5 mm
Measure your hose before printing to save time and material!
If your hose is different size and cannot fit inside, or outside, use Slicer scaling feature. (uniform = all axes together)
For example, if your hose outer diameter is 40mm, scale as follows:
34,5 is 100%, and you need 40,2mm so 5,7mm more (with tolerance)
5,7mm divide by 1% (0,345) = 5,7/0,345 = 16,521% more
So scale to 116,52% and measure before printing ;) (below is an example)
This way, your hose will fit inside the extractor.
Recommended print settings:
- printer: Prusa MK4
- layer height: 0.2mm
- sheet: satin
- nozzle diameter: 0.4mm
- print orientation: as on the picture
- material: PETG
- supports: needed as on the picture
- perimeters: 3
Feel free to support me on Ko-Fi https://ko-fi.com/kutilman
I can also sell my source files if you want to save some time designing variation.
Contact me here or via email on https://juraj.mriso.com