1 / 14
Card Boxes - SET OF 4 - Selesnya (2 colors), Gruul (3 colors), Azorius (2 colors), Simic (2 colors)! — zdjęcie 1
1 / 14

Card Boxes - SET OF 4 - Selesnya (2 colors), Gruul (3 colors), Azorius (2 colors), Simic (2 colors)!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Card Boxes - SET OF 4 - Selesnya (2 colors), Gruul (3 colors), Azorius (2 colors), Simic (2 colors)!

Ocena
0 / 5
Polubienia
3
Wydruki
0
Wyświetlenia
134
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables

Grab all of this series of four card boxes in a single download!

  • 1 of 4 - Selesnya 
    • two colors for box - white top, green bottom 
    • two colors for logo medallion - white and green 
  • 2 of 4 - Gruul
    • two colors for box - red top, green bottom 
    • three colors for logo medallion - white, green, and red
  • 3 of 4 - Azorius 
    • two colors for box - white top, blue bottom
    • two colors for logo medallion - white and blue
  • 4 of 4 - Simic
    • two colors for box - blue top, green bottom
    • two colors for logo medallion - blue and green

Making them is easy. Print base, print lid, print logo medallions (2x for each box), and CA glue the logo medallions into the box base and lid.

Can be made with or without any MMU (the ones in the pics were made without an MMU).

You can print any of the two-color logo medallions even without an MMU, by doing a filament-change at layer X. The specifics for this trick vary based on which slicer you are using. Google is your friend! 

One of the logo medallions (Gruul) is a 3-color design. It can be done by combining the filament-change at layer X trick plus a separate print of the third color, and then CA gluing the pieces of the third color into position. To do it this way, combine (in your slicer) the logo base STL and one of the two colors, and if not using an MMU, scale the height of the added color STL to 2x the height of the STL base, then add your filament change at layer X instruction. Reason: The base STL has holes in it for both of the other colors, for those using MMU.

Enjoy!

 1. Selesnya - white top, green bottom

2. Gruul - green bottom, red top

2. Gruul - green bottom, red top 

AND 

3. Azorius - white top, blue bottom

3. Azorius - white top, blue bottom

4. Simic - blue top, green bottom