Wltoys 12428 Steering upgrade to bellcrank appoach
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wltoys 12428 steering mechanism redesign from stock to bellcrank
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 1175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I guess you know that the Wltoys 12428 steering mechanism has lots of 'not good' traits, like getting stuck in sand or mud, wobbling, and having a low turning angle. Most of my RC cars have bell crank steering, so I decided to upgrade this car too.
This is the first (3d print-based) version, which is not perfect and has not been tested for durability.
What you need as an extra
- rod linkage (preferably with adjustable length)
- two M3 bolts 13mm long from suspension (if you plan to change the stock) or order search on Aliexpress by “M3 12428-0099”, I used this - https://s.click.aliexpress.com/e/_DlK7D6b
- two M 2.5 20mm bolts and two nuts. I used from there
Reused part:
- all the other rods used in steering are stock
QA
- What about stock suspension if I want it to stay
- it should fit since the pannel that holds the bellcranks should fit right under the shocks
- Is the project done
- NO!!! it is just a firs version, not fully tested yet but will be soon, please subscribe to my youtube channel so I'd know that you are interested!!! https://www.youtube.com/channel/UCLE0Gmir5LrE8t9jllJq6vQ?sub_confirmation=1
Ongoing project with vertical shocks:
https://www.printables.com/model/829578-front-shock-tower-mounted-on-body-for-wltoys-12428 https://youtube.com/shorts/DdzPL0e-7ag?feature=share https://youtube.com/shorts/sgHq0j4tagE?feature=share https://youtube.com/shorts/z37jOHiIlF0?feature=share