Vornado 173 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solid mount for mounting a Vornado 173 fan on the wall
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount for the Vornado 173 fan. It uses the stock screw holes that are used to install the stock base.
The ‘left’ mount has provisions to use a small bungie or zip tie to hold the fan to the mount if needed. The STL for the left model is upside down and needs to be flipped over to be printed correctly.
I'm using this mount in a travel trailer to mount the fan to the wall above our bed.
The print as designed is for ASA as I needed something that will hold up in higher temperatures.
I rethreaded the mounting holes for 4mm bolts, but the stock screws should fit through the base as well. I used normal wood screws to mount it to the wall.
I originally bought the fan at Walmart, but you can get it on Amazon here: https://a.co/d/813iqr2