2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 589
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply
These panel mounts require the DAP 2U MP-1 bracket.
This bracket must be cut in half, with the two halves moved 2.5U apart.
parts used:
- AxxSolder 3.0
- mean well LRS-150-24 power supply
- 4-port d-tap bus splitter
- voltage+current meter
- rocker switch
- Binder 99 0624 00 07 connector (See AxxSolder site)
Print the front panel mount / AxxSolder cap on the front.
No support material needed.
The two holes above the AxxSolder 3.0 PCB are dimensioned for M3 heat set inserts.
The two holes below the AxxSolder 3.0 PCB are dimensioned for small self-tapping screws
Included is the f3d file
Blanking plates of various widths and a cover plate for the DAP 2U MP1 bracket are included