1 / 2
The Cure in Orange 1987 - Hueforge - Filament Painting
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Live de The Cure à Orange (Fr) en 1987.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Noir Transmission Distance: 3
PLA Inco Rouge Transmission Distance: 3.8
PLA Kingroon Blanc Transmission Distance: 4.5
PLA Kingroon Blanc Transmission Distance: 6
Swap Instructions:
Start with Noir
At layer #4 (0.4mm) swap to Rouge
At layer #9 (0.8mm) swap to Blanc
At layer #17 (1.44mm) swap to Blanc for the rest.