Prusa XL series: Heating element Housing (Work in Progress)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I need a heated chamber, for my Prusa xl. This is a Work in Progress
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 2065
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Im constructing a heating element for the Prusa xl, so i can print parta without warping.
Since the heating element hat 600, the housing for the heating element must be safe for high temperature. I just bought i special carbon reinforced nylon, that is nearly 200° heat resistant. This is a work in progress, ao until i dont remove this text, you can download wverything, but make sure, you know what you get.
I use the enxlosure. And in my first tests the semi closed chamber heats up 35 degrees in 9 minutes. In this test, the printer itself was not heating. So reaching temperatures above 60+ and even 65° should be no problem. Everything above, and there could be problems with the fans and printed parta.All my final parts will also be listed here. Included parts are: Multiple Temperature probes, Heating element, Fan, Watt-Meter,Switches,Leds, Digital Thermistor
So dont forget to subscribe
You can support me via a tip clicking on the link:
Tip me on KO-FI by klicking here: