1 / 2
Halloween (2018) Michael Myers' Knife Replica / Prop | 8" J.A. Henckels International Chef's Knife — zdjęcie 1
1 / 2

Halloween (2018) Michael Myers' Knife Replica / Prop | 8" J.A. Henckels International Chef's Knife

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replica of Michael Myers' knife from the movie Halloween (2018)

Ocena
5 / 5
Polubienia
55
Pobrania
589
Wydruki
3
Wyświetlenia
2137
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Halloween (2018) Replica Knife

Based on the hero weapon from the movie Halloween (2018), a 8" J.A. Henckels International Chef's Knife, I have modeled a replica of Michael Myers' weapon of choice.

Assembly

I designed this with ease of printing in mind.  Since the bolster / finger guard isn't flat and I didn't want to have to print the blade on supports, the I separated these into three pieces, assembled with two pins.

I've provided a couple pin options as these can be quite tight fitting.  In my test prints, I did not add any tolerance relief, and though it was a bit tricky, it all snapped together nicely and I did not need any glue.

The handle scales attach just like the real thing, using pins.  Again, I've provided a couple options for tolerance, but was able to snap mine together without any relief.

You shouldn't need supports for any of the parts, the only overhangs are on the bolster/finger guard where the pins are inserted, and the cutting edge of the blade.  I didn't need supports here as the bridges are tiny.

Finally, I've included an optional two-piece blade, connected via dovetails within the handle (in hopes of hiding the joinery) for those who do not have a large enough print bed to print the blade as one piece.  This was somewhat of a last minute addition, so for those of you that use these files, please let me know if there are any changes you'd like.  Additionally, check out the cut feature in PrusaSlicer for more options.

Tagi