1 / 4
Relay & Bucks Converter Case — zdjęcie 1
1 / 4

Relay & Bucks Converter Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An enclosure for a buck converter and relay — tidy, protected 12 V-to-5 V power for LED lighting or accessories.

Ocena
0 / 5
Polubienia
0
Pobrania
26
Wydruki
0
Wyświetlenia
137
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An enclosure for a buck converter and relay. This is the setup I use to take 12 V from a power supply and step it down to 5 V for LED lighting on my printer — the case keeps both boards tidy and protected, with an opening for the wiring.

Useful for any 12 V-to-5 V LED or accessory wiring project where you want the electronics boxed up neatly. Print in PLA or PETG. No supports needed.

Print settings I used: 0.2 mm layers, 10% infill, no supports.

If you enjoy this model, consider supporting me: buymeacoffee.com/dstasiak

Tagi